How to Flash Huawei Y5II CUN-L22

0

How to Flash Huawei Y5II CUN-L22-The Huawei Y5II CUN-L22 smartphone comes with a 5.0 inch IPS HD (280×720) screen that is supported by an MT MT6582P Quad-Core processor with a speed of 1.3 GHz.
This smartphone was officially released in 2016, Because the price is very affordable, this Smartphone is much in the interest of Android Smartphone users.

How to Flash Huawei Y5II CUN-L22
How to Flash Huawei Y5II CUN-L22

Best Way to Flash Huawei Y5II CUN-L22 2021

Your Huawei Y5II CUN-L22 smartphone is having problems?.
As we already know, there are two possibilities for damage to the Smartphone, namely damage to hardware or software.

Read more:

Problems such as forgetting pattern/password, boot loop, hangs, total death (hard brick), and other problems such as slowness when in use. Of course, you can’t use a Smartphone for your various needs. This is not a very big problem for the Huawei Y5II CUN-L22 Smartphone, but a normal problem that also often occurs in other Smartphones.

In addition to resetting to factory settings, the way to restore the performance of the Huawei Y5II CUN-L22 Smartphone as before is by flashing.
Flashing is a process that will erase all data on your Smartphone. If the Smartphone can still turn on, you should do a data backup first before flashing.

How to Flash Huawei Y5II CUN-L22 using SP FlashTool

How to Flash the Huawei Y5II CUN-L22 requires the help of a PC/Laptop to be able to run it, because here we will use SP FlashTool Software.

Before you do Flashing, you first need to prepare materials for Flash first as follows:

Huawei Y5II CUN-L22 Flash Material bahan

  1. Download Firmware Huawei Y5II CUN-L22
  2. Download MTK All USB Driver
  3. Download SP Flash Tool
  4. We recommend that the phone battery is at least 60%, aiming to avoid flashing failure due to running out of power
  5. Setting up a PC/Laptop with Windows operating system
  6. Setting up the USB cable

NOTE:
Make sure the ROM or Firmware used is in accordance with the type and type of your Smartphone.

If you have downloaded all of the above ingredients in their entirety, then you can follow the steps to Flash the Huawei Y5II CUN-L22 using the following SP FlashTool:

  • Deactivate your Huawei Y5II CUN-L22 Smartphone.
  • Then Extract all the files that you downloaded earlier.
  • Next, install the MTK All USB Driver that you downloaded earlier on your PC/Laptop.
  • Then open the extracted SP FlashTool folder, then look for the flash_tool.exe file, then run the flash_tool.exe file by right-clicking -> Run As Administrator.
How to Flash Huawei Y5II CUN-L22
  • When SP FlashTool opens, please click on the Scatter_loading section.
How to Flash Huawei Y5II CUN-L22
  • Then enter the MT6582_Android_scatter.txt file which is in the Firmware folder that you extracted earlier then click Open.
How to Flash Huawei Y5II CUN-L22

NOTE:
when File Scatter has been successfully loaded, you will see several check lines in Flashtool. In the File row, remove the checkmark on the UBOOT and PRELOADER options if your Huawei Y5II CUN-L22 Smartphone can still turn on but is stuck until the logo only (boot loop).

But if your Smartphone is completely dead (hard brick) aka it can’t turn on until the logo, then check all the list of file options.

  • Then select the Download Only option. Then click the green Download button.
How to Flash Huawei Y5II CUN-L22
  • Then Connect the Huawei Y5II CUN-L22 Smartphone with your PC/Laptop.
  • If your Smartphone has not been detected, please press volume up + volume down simultaneously to speed up the connection between Smartphone and PC/Laptop.
  • When the Flashing process runs normally, the progress bar at the bottom of the SP Flash Tool will have a moving color indicator, from red to yellow. So please wait for it to finish 100%.
How to Flash Huawei Y5II CUN-L22
  • After Flash Huawei Y5II CUN-L22 is complete, then there will be a notification that says Download OK.
How to Flash Huawei Y5II CUN-L22
  • After the Flashing Process has been completed, please unplug the USB cable then turn on your Huawei Y5II CUN-L22 Smartphone.
  • During the reboot process, it will take between 5-10 minutes. So, please just wait.

Above is an article that discusses how to Flash Huawei Y5II CUN-L22 about boot loop, hangs, totally dead (hard brick), slow using SP FlashTool, hopefully, this article can help you.

Conclusion:

This article is very helpful or useful. Flash Huawei Y5II CUN-L22 having problems?.

The Flash Huawei Y5II CUN-L22 root and Install T smartphone was officially released in 2021 because the price is very affordable, this Smartphone is much in the interest of Android Smartphone users on how to Flash Huawei Y5II CUN-L22.

Don’t forget to bookmark and always visit our website Dlinksetupwizard.com because you will find the latest Technology, Android, games, Apps  ETC, that we will update every

day

Previous articleHow to Flash Huawei Y3II LUA-U22 2021
Next articleHow to Flash Huawei Y6 2021
I'm Ruhul Amin, from Assam Guwahati (India) I have been Running this Blog since 2020 with my full effort to Help users in the Tech field and clear doubt and provide advanced guides in simple methods.

LEAVE A REPLY

Please enter your comment!
Please enter your name here