How to Flash Samsung Galaxy J8 SM-J810Y 2021

0

How to Flash Samsung Galaxy J8 SM-J810Y-The Samsung Galaxy J8 SM-J810Y is a Smartphone with a capacity of 3500mAh and a 6″ screen equipped with a 16 + 5MP rear camera with a pixel density of 274ppi and a display resolution of 720 x 1480pixels, This Smartphone has an official Octa-Core processor Samsung Galaxy J8 SM-J810Y released in 2018.

How to Flash Samsung Galaxy J8 SM-J810Y
How to Flash Samsung Galaxy J8 SM-J810Y

Best Way to Flash Samsung Galaxy J8 SM-J810Y 2021

Your Samsung Galaxy J8 SM-J810Y smartphone is having problems?.
As we already know, there are two possibilities for damage to the Smartphone, namely damage to hardware or software.

Read more:

In addition to resetting to factory settings, the way to restore the performance of the Samsung Galaxy J8 SM-J810Y Smartphone as before is by flashing.

Flashing is a process that will erase all data on your Smartphone. If the Smartphone can still turn on, you should do a data backup first before flashing.

How to Flash Samsung Galaxy J8 SM-J810Y using Odin

How to Flash the Samsung Galaxy J8 SM-J810Y requires the help of a PC/Laptop to be able to run it, because here we use Odin Software.

Before you do Flashing, you first need to prepare materials for Flash first as follows:

Flash material for Samsung Galaxy J8 SM-J810Y

  1. Download Samsung USB Driver
  2. Download ODIN3_v3.13.1
  3. Download Firmware Samsung Galaxy J8 SM-J810Y
    Android Oreo 8.0 XID
    Android Pie 9.0 XID
  4. Setting up a PC/Laptop with Windows operating system
  5. We recommend that the phone battery is at least 60%, aiming to avoid flashing failure due to running out of power
  6. Setting Up the USB Cable

NOTE:
Make sure the ROM or Firmware used is in accordance with the type and type of your Smartphone.

The Firmware file that you downloaded if it is still in the form of WinRAR/7zip with the .zip/.rar extension, please extract the file first, when it has been extracted there will be a file with the extension HOME.tar.md5.

If you have downloaded all of the above ingredients in their entirety, then you can follow these steps to Flash the Samsung Galaxy J8 SM-J810Y below:

  • Deactivate your Samsung Galaxy J8 SM-J810Y Smartphone.
  • Then, please Extract the Odin File and Firmware File that was downloaded earlier.
  • Next, Install the Samsung USB Driver on your PC/Laptop.
  • Run the ODIN3_v3.13.1 program by right-clicking > Run as administrator.
  • Then enter Downloading Mode by pressing the How to Flash Samsung Galaxy J8 SM-J810Y using Odinbutton + Volume down + volume up simultaneously.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • When in the “Warning” Menu, then continue by pressing the Volume Up button.
  • After entering into Downloading Mode then you can then release all the buttons earlier.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • Next, connect your Samsung Galaxy J8 SM-J810Y Smartphone to your PC/Laptop using a USB cable.
  • Make sure your Smartphone is connected to Odin, Make sure there is also an “Added” notification.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • Please look for the Firmware File that you downloaded earlier, then enter it in the Odin Software.
  • The Firmware file that you download will be in the form of a zip / Rar, first, extract the file, then there will be a file with the MD5 extension.
  • Then go back to the Odin Software and make sure Auto Reboot and F. Reset Time are ticked on the Flash option.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • Then enter the downloaded firmware by clicking AP, then look for the Tar.MD5 file with the extension earlier. Then click Start, then the process of Flashing your Smartphone will run.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • Wait until the Flashing process is complete, there will be a “PASS” notification in the Odin program.
How to Flash Samsung Galaxy J8 SM-J810Y using Odin
  • When Flashing is successful, please remove the USB cable and turn on your Samsung Galaxy J8 SM-J810Y Smartphone.
  • During the reboot process, it will take between 5-10 minutes. So, please just wait.

Above is an article that discusses how to Flash a Samsung Galaxy J8 SM-J810Y about boot loop, hang, totally dead (hardback) using Odin, easy and simple to use, hopefully, this article can help you.

Conclusion:

This article is very helpful or useful. Flash Samsung Galaxy J8 SM-J810Y having problems?.

The Flash Samsung Galaxy J8 SM-J810Y root and Install T smartphone was officially released in 2021 because the price is very affordable, this Smartphone is much in the interest of Android Smartphone users on how to Flash Samsung Galaxy J8 SM-J810Y.

Don’t forget to bookmark and always visit our website Dlinksetupwizard.com because you will find the latest Technology, Android, games, Apps  ETC, that we will update every

day

Previous articleHow to Flash Samsung Galaxy J6 SM-J600G 2021
Next articleHow to Flash Oppo A5s CPH1909
I'm Ruhul Amin, from Assam Guwahati (India) I have been Running this Blog since 2020 with my full effort to Help users in the Tech field and clear doubt and provide advanced guides in simple methods.

LEAVE A REPLY

Please enter your comment!
Please enter your name here