How to Flash Vivo Y19 2021

0

How to Flash Vivo Y19-The Vivo Y19 smartphone was officially released in 2019, This smartphone is equipped with a 6.53-inch touchscreen with a resolution of 1080×2340 pixels at a pixel density of 394 pixels per inch (ppi) and an aspect ratio of 19.5:9. The Vivo Y19 is powered by a MediaTek Helio processor. P65 octa-core.

Htow o Flash Vivo Y19
How o Flash Vivo Y19

Best Way to Flash Vivo Y19 2021

Your Vivo Y19 smartphone is having problems?.
As we already know, there are two possibilities for damage to the Smartphone, namely damage to hardware or software.

Read more:

  • How to Flash Vivo Y91 PD1818F
  • How to Flash Vivo Y15
  • How to Flash Oppo Neo 7 A33W
  • Problems such as forgetting pattern/password, boot loop, hangs, total death (hard brick), and other problems such as slowness when in use. Of course you can’t use a Smartphone for your various needs. This is not a very big problem for the Vivo Y19 Smartphone, but a normal problem that also often occurs in other Smartphones.

In addition to resetting to factory settings, the way to restore the performance of the Vivo Y19 Smartphone to its original state is by flashing.
Flashing is a process that will erase all data on your Smartphone. If the Smartphone can still turn on, you should do a data backup first before flashing.

How to Flash Vivo Y19 using SP FlashTool

How to Flash Vivo Y19 requires the help of a PC / Laptop to be able to run it, because here we will use SP FlashTool Software.

Before you do Flashing, you first need to prepare materials for Flash first as follows:

Vivo Y19 Flash Materials

  1. Download SP Flashtool v5
  2. Download Stock ROM / Firmware Vivo Y19
  3. MediaTek USB Driver Download
  4. Setting up a PC/Laptop with Windows operating system
  5. We recommend that the phone battery is at least 60%, aiming to avoid flashing failure due to running out of power
  6. Setting up the USB cable

NOTE:
Make sure the ROM or Firmware used is in accordance with the type and type of your Smartphone.

If you have downloaded all of the above ingredients in their entirety, then you can follow the steps to Flash Vivo Y19 using the following SP FlashTool:

  • Deactivate your Vivo Y19 Smartphone.
  • Then Extract all the files that you downloaded earlier.
  • Next, install the Mediatek USB Driver that you downloaded earlier on your PC/Laptop.
  • Then open the extracted SP FlashTool folder, then look for the flash_tool.exe file, then run the flash_tool.exe file by right-clicking -> Run As Administrator.
How to Flash Vivo Y19 using SP FlashTool
  • When SP FlashTool opens, please click on the Scatter_loading section.
How to Flash Vivo Y19 using SP FlashTool
  • Then enter the MT 6582 _Android_scatter.txt file which is in the Firmware folder that you extracted earlier then click Open.
How to Flash Vivo Y19 using SP FlashTool

NOTE:
when File Scatter has been successfully loaded, you will see several check lines in Flashtool. In the File row, remove the checkmark on the UBOOT and PRELOADER options if your Vivo Y19 Smartphone can still turn on but is stuck until the logo only (boot loop).

But if your Smartphone is completely dead (hard brick) aka it can’t turn on until the logo, then check all the list of file options.

  • Then select the Download Only option. Then click the green Download button.
How to Flash Vivo Y19 using SP FlashTool
  • Then Connect the Vivo Y19 Smartphone with your PC/Laptop using a USB cable.
  • If your Smartphone has not been detected, please press volume up + volume down simultaneously to speed up the connection between Smartphone and PC/Laptop.
  • When the Flashing process runs normally, the progress bar at the bottom of the SP Flash Tool will have a moving color indicator, from red to yellow. So please wait for it to finish 100%.
How to Flash Vivo Y19 using SP FlashTool
  • After Flash Vivo Y19 is complete, then there will be a notification that says Download OK.
How to Flash Vivo Y19 using SP FlashTool
  • After the Flashing Process has been completed, please unplug the USB cable then turn on your Vivo Y19 Smartphone.
  • During the reboot process, it will take between 5-10 minutes. So, please just wait.

Above is an article that discusses how to Flash Vivo Y19 about boot loop, hangs, totally dead (hard brick), slow using SP FlashTool, hopefully, this article can help you.

Conclusion:

This article is very helpful or useful. Flash Vivo Y19 having problems?.

The Flash Vivo Y19 root and Install T smartphone was officially released in 2021 because the price is very affordable, this Smartphone is much in the interest of Android Smartphone users on how to Flash Vivo Y19.

Don’t forget to bookmark and always visit our website Dlinksetupwizard.com because you will find the latest Technology, Android, games, Apps  ETC, that we will update every

day

Previous articleHow to Flash Vivo Y91 PD1818F
Next articleHow to Flash Xiaomi Redmi 8A 2021
I'm Ruhul Amin, from Assam Guwahati (India) I have been Running this Blog since 2020 with my full effort to Help users in the Tech field and clear doubt and provide advanced guides in simple methods.

LEAVE A REPLY

Please enter your comment!
Please enter your name here